Let's Talk About Home Improvement & Interior Design Model

Quite a lot of things that must be considered when we design a system of sanitation in the home. Good sanitation system is directly related to the provision of clean water and waste treatment. Clean water is needed for bathing, washing and cooking. The result of this activity in the form of sewage waste.

INSTALLATION OF WATER SUPPLY (WHITE WATER)

The problem of the installation of clean water is the water discharge. Whenever possible, make the installation of clean water that can pour water in the same amount at each point of the valve. At least, there are two models of clean water that can be applied.

* Open Installation. It means, the main channel  flow straightly from the pump or tank water to the tap points. The tip line ends at a point.

* Closed Installation. It means, the main channel flow from the pump or water tank to the points of branching channels . The tip of the main channel is over back to the main channel near the pump.

Both of  installations models above have profit and loss. Closed Installation will waste more
pipe. However, closed channel believed to be capable of dividing the water flow more evenly into every faucet.

INSTALLATION OF WASTE (GREY WATER)

Double pipeline (on the left and right of the building) becomee the best of alternative wastewater sewers. The disposal system of wastewater has pros and cons. The advantage, if one channel blocked, other channels can still function properly.

If you want an efficient drainage pipe. You can choose a single pipe drains. The main exhaust pipe can be placed on one side of the building. Left or right, depending on the design of the house. However, to avoid clogged, you should use a main pipe measuring at least 4 inches.

SEPTICTANK

In order to create channels to safe sanitation, note excreta disposal  channel. Strive the distance from the toilet waste into septictank not too far away. The most important thing that must be considered  is the slope for all flush, direct fecal flow and fall into septictank.

Septictank should be made watertight. The size and capacity must be adjusted as needed. Septictank waterproof made with the purpose for debris buildup in it do not come out and seeping into our wells and neighboring wells. Because if that happens, water wells become unhealthy and unfit for consumption.

<< 4 Tips To Manage Furniture And Interior Of Apartment Techniques for decorating a small basement >>